Korea | YEGREENA COLOR FLOOR (Sub.Eng ver)
본문
Epoxy flooring material for concrete surfaces (an effect of improved interior design by non-solvent based top coat)
This paint is a non-solvent based transparent product based on epoxy resin and modified amine with metallic pearls added. It dries fast with its excellent properties of hardness, adhesion, durability, chemical resistance and dust proofness. The product forms smooth and beautiful appearance after application. And its metallic pearls maximize the interior decoration effect.
HOW TO USE
Surface treatment
1. Cure concrete for at least 28 days at a temperature of 21℃ and a relative humidity of 50%.
2. Completely remove the oil, moisture, sand, dust, laitance and other foreign matter from the surface and maintain surface smoothness.Coating
method
1. Reinforce cracks, crevices, and joints between walls and floors with an epoxy putty after primer.
※ Apply smoothly using plain scrapper, pitchfork, square towel, etc. for pattern and color design.
2. Care should be taken since problems may occur such as cratering upon thin coating. (2mm or less - 1 time)
※ A dragged lining effect of the color pearls may appear on rough substrates with dirt or levelling.
※ It has lower hiding power when used solely for bright colors (flash white).
Appropriate construction specifications
▷Primer : YEGREENA COLOR FLOOR PRIMER
▷Top coat : YEGREENA COLOR FLOOR TOP COAT
Coating conditions
1. Atmosphere Temperature: 5~35℃, Surface Temperature: 40℃ or below, Relative Humidity: 80% or less, Moisture content in the concrete: 6% or less
2. Due to the nature of epoxy lining transparent paint, a color difference may be shown over time if the coating surface is a bright color.
3. Interior decoration effects such as pearl and pattern may vary depending on the drying time, application thickness, etc.
4. The degree of occurrence of yellowing varies depending on the long-term exposure to sunlight or the use time of indoor lighting, etc.
5. The use of a thinner more than the recommended amount causes a further delay in drying, decline in hardness, whitening, skid marks, etc.
